Ottosson White linseed soap 5 liters
Our WHITE Linseed soap is crafted from Swedish cold pressed linseed oil with the addition of Titanium dioxide pigment. The product is specially developed for treating wood floors where a light / white tinted surface is desired.Usage:1. Shake the can properly before use.
2. Dissolve 20% of white soap in 80% of lukewarm water.
3. Scrub the soap solution in the longitudinal direction of the wood.
4. Wait 30-60 minutes and then wipe off any excess soap solution/water with a dry/twisted mop or cloth.
5. Repeat treatment if a higher whiteness is desired.
If more saturation is desired, wait 1 – 2 days and further saturate the surface with Ottosson White Linseed soap/Ottosson Linseed soap natural. Use the same amount of soap/water for the solution as abovecare/cleaning
for daily cleaning of the surfaces cleaned by white soap use just vacuum cleaner When the wood starts to get dirty, it is easily washed off with Ottosson Linseed oil soap natural. Use a weaker solution of 1 liter of soap to 20 liters of lukewarm wateriné názvy: Ottosson Vitsåpa, Ottosson white linseed oil soap
Le Tonkinois – Bio Impression
Special inpregnation for teak wood Base layer for Le tonkinois, suitable for all wood types is a deep-penetrating, fast-drying and moisture-protecting natural oil varnish consisting of linseed oil, castor oil, palm oil, lemon oil and aloe. It has an excellent adhesion to all hard resinous and greasy woods. Provides longlasting protection and helps hardening of wood perfect protection against UV also used as base layer for varnishThanks to deeply penetrating features, the capilars of the wood are naturally closing this is decreasing the possibility of wood bloating and minimalizes damage of paint It has an excellent adhesion to all hard resinous and greasy woods.Application:To obtain an “oily appearance” apply Bio Impression with a Scotch-Brite sponge. The wooden surfaces should be clean and grease-free, preferable the surface should be freshly sanded. The moisture content of the wood must not exceed 14%. Bio Impression is applied to at least 2 layers indoors and 3-5 layers outdoors.Usage:Approx 20m2 per liter and layer
More layers - more protectionDrying time:Approx 24 hrs by room temperature, with good ventilation and low humidity.
Select options
This product has multiple variants. The options may be chosen on the product page
Varnish shade BLACK
Portion packed linseed oil paint in cans (0,5 liter) is intended for mixing with 0,5 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of BLACK. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Tung oil varnish
Gloss, yellowish, effective water protection, dries out quickly Density: 18m2/1l One layer of thung oil dries after 2 hrs, hardens after 8hrs, and can be polished again after 24hrs Apply with brush or syringe, please follow the health and safety regulations in your country - tung oil is considered to be highly toxic substance. For interiors apply 2 layers, for exterior it is reccomended to apply 4 layers. Tung oil is highly protective and durable. It is scratch resistant and UV resistant therefore is often used for surfaces near to ocean or placed in the mountains (above the sealevel) it is very effective in protecting wooden floors. It can be addet into paint but max 60 g per liter 10%. Tung oil is to be used directly from the can.