Linseed paint Umber naturelle
NCS-code: 8505-Y10RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3).
When painting indoors: -Add 1% (10 ml per litre) of the drying agent cosirk. -Ensure good ventilation and follow the recommended drying times. -When painting indoors, higher demands are made on finish and surfaces. -Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish. Added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint For better protection our oil varnish can be used after aprox. 2 weeks drying. To clean the painted surfaces use water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Umber natural
Select options
This product has multiple variants. The options may be chosen on the product page
White linseed paint suitable for plaster – VIT Puts
Made specially for plasters, suitablle also for painted plasters or pH neutral plasters. The paint contains turpentine. Paint in two thin layers, use a brush or a roller. The final paint has semi glossy effect This type of paint has a long tradition and was often used for facades in urban settings. In 18th and 19th century it was always considered as valuable product.Working process on plaster is the same as when we paint wood. The main diffeence - wood has a neutral pH 7 while plaster has alcalic high pH.Plaster can contain cement and lime. Bigger the ammount of cement quicker the drying time. In the process of plaster drying carbonisation occures - alcaline pH lovers and approx after 3 months becomes neutral. Therefor at least 3 months are required before painting the plaster. When painting an old plaster no wait is required.
Linseed paint Italian Green Umber
NCS-code: 8505-Y20RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Italian Green Umber
Select options
This product has multiple variants. The options may be chosen on the product page