Akapad Paper Sponge white, pure
18,80 € with VAT
Shellack polish
Price range: 13,70 € through 43,90 € with VAT
Tung oil varnish
33,30 € with VAT
Gloss, yellowish, effective water protection, dries out quickly Density: 18m2/1l One layer of thung oil dries after 2 hrs, hardens after 8hrs, and can be polished again after 24hrs Apply with brush or syringe, please follow the health and safety regulations in your country – tung oil is considered to be highly toxic substance. For interiors apply 2 layers, for exterior it is reccomended to apply 4 layers. Tung oil is highly protective and durable. It is scratch resistant and UV resistant therefore is often used for surfaces near to ocean or placed in the mountains (above the sealevel) it is very effective in protecting wooden floors. It can be addet into paint but max 60 g per liter 10%. Tung oil is to be used directly from the can.
Available on backorder in 10-20 days
Related products
Wax oil
Ottosson oil waxis used like a shoe cream to protect and give a beautiful lustre to brick floors, tiles, table tops and window sills made of natural stone, wood and metal. Oil wax is perfect on surfaces stained with Ottossons varnish shades. The oil wax discolours the glaze minimally leaving the surface beautiful and as smooth as velvet. The oil wax discolours the glaze minimally leaving the surface beautiful and as smooth as velvet.
Product contains: Linseed oil, Beeswax, Carnaubawax, Dammar resin, Terpentine
Spread the oil wax cream very thinly with a cloth or shoe brush. Polish the surface to a satin finish using a soft shoe brush after one day. The product is extremely economical; 1 litre of oil wax is sufficient for 30 -50 m2. If the wood is treated before with Raw linseed oil or Cooked linseed oil the substantiality of wax will increase.
Check out the short video about protecting brick floor by wax and linseed oilBrick floors are beutifull and durable After oil and wax treatment they become even more durable yet at the same time easier to maintain. |
Wood care with linseed oilUntreated wood will eventually matt after few years In this video you can see how to treat your furniture This treatment also helps to prevent/ slow down the wear out process |
Varnish shade AGED WOOD
Portion packed linseed oil paint in cans (0,16 liter) is intended for mixing with 1 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of AGED WOOD. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.
If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Varnish shade TEAK
Portion packed linseed oil paint in cans (0,107 liter) is intended for mixing with 1 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of TEAK. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.
If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Ottosson White linseed soap
Our WHITE Linseed soap is crafted from Swedish cold pressed linseed oil with the addition of Titanium dioxide pigment. The product is specially developed for treating wood floors where a light / white tinted surface is desired.
Usage:
1. Shake the can properly before use.
2. Dissolve 20% of white soap in 80% of lukewarm water.
3. Scrub the soap solution in the longitudinal direction of the wood.
4. Wait 30-60 minutes and then wipe off any excess soap solution/water with a dry/twisted mop or cloth.
5. Repeat treatment if a higher whiteness is desired.
If more saturation is desired, wait 1 – 2 days and further saturate the surface with Ottosson White Linseed soap/Ottosson Linseed soap natural. Use the same amount of soap/water for the solution as above
care/cleaning
for daily cleaning of the surfaces cleaned by white soap use just vacuum cleaner When the wood starts to get dirty, it is easily washed off with Ottosson Linseed oil soap natural. Use a weaker solution of 1 liter of soap to 20 liters of lukewarm water
iné názvy: Ottosson Vitsåpa, Ottosson white linseed oil soap
Varnish shade Driftwood
Portion packed linseed oil paint in cans (0,16 liter) is intended for mixing with 1 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of DRIFTWOOD. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.
If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Le Tonkinois Gelomat
Le Tonkinois Gelomat matting agent for Le Tonkinois fermežový lak. Add between 20-45% by volume to achieve gloss from silk matt to full matt.
*
Varnish shade SANDSTONE
Portion packed linseed oil paint in cans is intended for mixing with 1 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of SANDSTONE. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.
If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Damar powder
Dammarharts or Damarharts any of various resins used in varnishes and inks and obtained chiefly in Malaya and Indonesia from several timber trees (families Dipterocarpaceae and Burseraceae) package contains carefullz chosen bright and clear pieces Dammar is to be resoved in turpentine. It creates varnish effect. Dammar has been used for decades to create exceptional glossy effect especcially for oil paintings
powder, grains, can contain dirt