Linseed paint Per Hans Blue
NCS-code: 6022-R82B
Made of Swedish cold-pressed boiled linseed oil and colour pigments. Adapted for painting both indoors and outdoors. suitable for painting in interior and exterior
* (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). *
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. Other names: Linseed oil paint Per Hans Blue.
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint 4A-JOLES Ochre Yellow
NCS-code: 1530-Y21R
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. Other names: Linseed oil paint 4A-JOLES Ockragul
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Copenhagen green
NCS code: 7116-G37Y
Made of Swedish cold-pressed boiled linseed oil and colour pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. Other names: Linseed oil paint Copenhagen Green
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Graphite
Traditional paint for painting on iron and sheet metal.
Suitable for other surfaces like wood etc.
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
NCS code: 8400-N
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint 2C Cobalt Blue
NCS-code: 4539-R87B
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors. suitable for painting in interior and exterior
sample on the picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. Other names: Linseed oil paint 2C Cobalt Blue
Select options
This product has multiple variants. The options may be chosen on the product page
Ottosson hard linseed soap 0,5 liter
made the same way as our other soaps It does not contain any perfume or preservative and is just like our liquid soap, a greasy linseed oil soap that does not dry out the skin. PH 8,4
The use of the solid soap can differ slightly from the liquid, as it fits very well on vertical surfaces as it does not drain off, such as when cleaning an oven.
is concentrated One of the many advantages of the solid soap is that it is concentrated and thus we minimize the transport of water. When diluting the solid soap with water, 0.5 liters of solid soap equals about 1.5 liters of liquid soap.
For liquid solution: Dissolve 2 tbsp. per 5 liters of water.
Can be used to wash brushes, cleaning of wooden floors, carpet cleaning
other names: Ottosson linseed soap paste
Linseed paint Umber Grey
NCS code: 3005-Y20R
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
Sample on the picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. other names: Linseed oil paint Umber Grey
Select options
This product has multiple variants. The options may be chosen on the product page
Swedish cold-pressed raw linseed oil packaging 0,5 liter
Swedish cold-pressed raw linseed oil of the highest quality. The oil is stored for at least 6 months after being pressed so that all slime can settle. It is a natural treatment without any chemical additives. Purified linseed oil is then decanted to another storage tank.
Raw linseed oil has a structure that makes it easier to penetrate into all sorts of surfaces. This makes it an effective protection especially for wooden surfaces. In addition to oiling, raw linseed oil is used to dilute linseed oil paint outdoors. It is also used for storing paint brushes. It diries out very slowly
Concentration: 15-20m2/l
Other names: Swedish cold-pressed raw linseed oil
Linseed paint Matt White Indoors
NCS-code: 0502-Y18R
NEW! For over two years we have been delveloping a new Matt linseed oil paint for painting indoors that is not classified as hazardous to health or the environment. Previously, our matt linseed oil paint contained turpentine as a solvent, creating working environment problems when painting indoors. Matt linseed oil paint contains a highly purified odourless petroleum naphtha (with better working environment values than aliphatic naphtha). Petroleum naphtha has a benzene content of 0.01%, the limit value being 0.1%. The paint contains only 2.0 dl. of naphtha per litre. - Can be used on all surfaces, also can be used on pH-neutral plasters, wood, tiles or already painted surfaces and metal. The paint is applied undiluted 1-2 times depending on the substrate. Highly absorbent substrates should be primed first using the linseed oil paint White Primer Indoors.
Highly absorbent substrates should be primed first using the linseed oil paint White Primer Indoors. The paint functions well as a primer on previously painted surfaces. Dries out after aprox. 10 hrs Can be repainted after 24 hours
Paint coverage: 5-12 sqm depending on the application method and base.
Tools: Paintbrush, roller or spray.
Matt
Shade: white
The painted surface is easy to clean with washing-up detergent and water after 3 weeks. The paint does not contain water therefore is not sensitive to frost and can be stored for a longer period. The paint has several advantages when compared to water-soluble emulsion paints.
The surfase is durable and easy to clean. The paint functions well in unheated areas. The paint is long lasting and does not decay.
other names: Linseed oil paint Matt White Indoors
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Pearl Grey
NCS code: 1805-G88Y
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
when painting indoors:
Add 1% (10 ml per litre) of the drying agent cosirk.
Ensure good ventilation and follow the recommended drying times.
When painting indoors, higher demands are made on finish and surfaces.
Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. *
Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.
other names: Linseed oil paint Pearl Grey
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Mid-grey
NCS code: 3402-G50Y
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. Other names: Linseed oil paint Mid-grey
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Chromium Oxide Green
NCS code: 5433-G25Y
Made of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
sample on the picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). You can mix these shades your self
When painting indoors: -Add 1% (10 ml per litre) of the drying agent cosirk. -Ensure good ventilation and follow the recommended drying times. -When painting indoors, higher demands are made on finish and surfaces. -Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish Added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range. other names: Linseed oil paint Chromium Oxide Green
Select options
This product has multiple variants. The options may be chosen on the product page