Linseed paint Hardeberga Blue
NCS-code: 5311-R78BMade of Swedish cold-pressed boiled linseed oil and colour pigments. Adapted for painting both indoors and outdoors. suitable for painting in interior and exterior
* (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). *
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Hardeberga Blue
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed soap Rosemary / Bergamott
A pure natural product based on Swedish cold pressed linseed oil with the addition of natural fragrant essential oils.The soap is biodegradable and good for many things:
- Detergent for clothing
- General cleaning
- window cleaning
- Hand wash & shower soap (does not dry out the skin)
- Footbath
- Lubricants (e.g., squeaky hinges), Cleaning & re-greasing of rubber boots & leather / leather
- oven cleaner
- Scouring of wooden floors
- Car wash etc.
Select options
This product has multiple variants. The options may be chosen on the product page
Ottosson linseed soap – Jasmine
A pure natural product based on Swedish cold pressed linseed oil with the addition of natural fragrant essential oils.The soap is biodegradable and good for many things:
- Detergent for clothing
- General cleaning
- window cleaning
- hand and body soap
- foothbath
- Lubricants (e.g., squeaky hinges), Cleaning & re-greasing of rubber boots & leather / leather
- oven cleaner
- Scouring of wooden floors
- Car wash etc.
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed soap Cedar / Eucalyptus
A pure natural product based on Swedish cold pressed linseed oil with the addition of natural fragrant essential oils.The soap is biodegradable and good for many things:
- Detergent for clothing
- General cleaning
- window cleaning
- hand soap and shower gel
- feetbath
- Lubricants (e.g., squeaky hinges), Cleaning & re-greasing of rubber boots & leather / leather
- oven cleaner
- Scouring of wooden floors
- Car wash etc.
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed Paint Ardbeg Green
NCS code: 7313-G71YMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). You can mix these shades your self
When painting indoors: -Add 1% (10 ml per litre) of the drying agent cosirk. -Ensure good ventilation and follow the recommended drying times. -When painting indoors, higher demands are made on finish and surfaces. -Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish Added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. 2 weeks drying time. Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Ardbeg Green
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint ribban green
NCS code: 2314-G66YMade of Swedish cold-pressed boiled linseed oil and colour pigments. Adapted for painting both indoors and outdoors.
Note: The sample shows three different shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). You can mix these different shades yourself.
When painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.other names: Linseed oil paint Ribban Green
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint 2A-94 Golden Yellow
NCS code: 2740-Y25RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names:Linseed oil paint 2A-94 Golden Yellow
Select options
This product has multiple variants. The options may be chosen on the product page
Sun-oxidized linseed oil
Sun-oxidized linseed oil is a special product that is manufactured by allowing raw linseed oil to stand in large containers outdoors under the influence of sunlight and oxygen in the air. The process lasts a long time (3–4 months), after which the linseed oil bleaches and thickens from oxidation. This method of producing sun-oxidized linseed oil corresponds to the old way of producing so-called “linseed stand oil”. Sun-oxidized linseed oil, mentioned in texts dating from the 17th century, has been used in art painting and older craft painting. This oil has very good drying and gloss properties and good resistance to UV light. * This oil has very good drying and gloss properties and good resistance to UV light.We use sun-oxidized linseed oil is as a medium in our artist paints to improve the paint’s drying and gloss properties.It can also be added to our linseed oil paints in the final coat to create a deeper shine. We recommend using it for our darker shades to acquire a beautiful, deep shine. Add about 10 to 15 percent by volume to the paint.Caution! Note If you add it to white and light gray shades, the paint may thicken.Other names: Sun-thickened linseed oil
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Burnt Terra
NCS-code: 5338-Y68RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3).
When painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean the surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Burnt Terra
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint 4A-920 Manor House Yellow
NCS-code: 2242-Y19RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). you can mix these shades your selfwhen painting indoors:
Add 1% (10 ml per litre) of the drying agent cosirk.
Ensure good ventilation and follow the recommended drying times.
When painting indoors, higher demands are made on finish and surfaces.
Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. *
Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint 4A-920 Herrgårdsgul
Select options
This product has multiple variants. The options may be chosen on the product page
Linseed paint Antique Green
NCS code: 4112-G60Y
Made of Swedish cold-pressed boiled linseed oil and colour pigments. Adapted for painting both indoors and outdoors.
Note: The picture shows three different shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three volumes of White Titanium-Zinc (1+3). You can mix these different shades yourself.
Considerations when painting indoors Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish. Ottosson * The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final colour. Surfaces subjected to increased wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Antique Green, Ľanová farba Stará Zelená
Select options
This product has multiple variants. The options may be chosen on the product page
Lindseed paint Sand Yellow
NCS-code: 2431-Y17RMade of Swedish cold-pressed boiled linseed oil and color pigments. Adapted for painting both indoors and outdoors.
The picture shows tree shades (Above) the standard shade, (left) a mixture of equal volumes of standard shade and White Titanium-Zinc (1+1) and (right) a mixture of one part standard shade and three parts of White Titanium-Zinc (1+3). you can mix these shades your self
when painting indoors: Add 1% (10 ml per litre) of the drying agent cosirk. Ensure good ventilation and follow the recommended drying times. When painting indoors, higher demands are made on finish and surfaces. Higher gloss and improved flow can be achieved by adding Ottossons Sun Oxidized linseed oil and/or Linseed Oil Varnish The added ingredients should be between 0.5-1.5 dl/litre and should only be applied in the final paint. Surfaces subjected to heavy wear can be further treated with oil varnish or oil veneer after approx. 2 weeks. * Clean painted surfaces with water and detergent (not soap) or use the product Fulgentin, which can be found in our product range.Other names: Linseed oil paint Sand Yellow
Select options
This product has multiple variants. The options may be chosen on the product page