Akapad Paper Sponge white, pure
18,80 € with VAT
Shellack polish
Price range: 13,70 € through 46,10 € with VAT
Tung oil varnish
33,30 € with VAT
Gloss, yellowish, effective water protection, dries out quickly Density: 18m2/1l One layer of thung oil dries after 2 hrs, hardens after 8hrs, and can be polished again after 24hrs Apply with brush or syringe, please follow the health and safety regulations in your country – tung oil is considered to be highly toxic substance. For interiors apply 2 layers, for exterior it is reccomended to apply 4 layers. Tung oil is highly protective and durable. It is scratch resistant and UV resistant therefore is often used for surfaces near to ocean or placed in the mountains (above the sealevel) it is very effective in protecting wooden floors. It can be addet into paint but max 60 g per liter 10%. Tung oil is to be used directly from the can.
Available on backorder in 10-20 days
Related products
Swedish cold-pressed raw linseed oil packaging 0,5 liter
Swedish cold-pressed raw linseed oil of the highest quality. The oil is stored for at least 6 months after being pressed so that all slime can settle. It is a natural treatment without any chemical additives. Purified linseed oil is then decanted to another storage tank.
Raw linseed oil has a structure that makes it easier to penetrate into all sorts of surfaces. This makes it an effective protection especially for wooden surfaces. In addition to oiling, raw linseed oil is used to dilute linseed oil paint outdoors. It is also used for storing paint brushes. It diries out very slowly
Concentration: 15-20m2/l
Other names: Swedish cold-pressed raw linseed oil
Le Tonkinois Gelomat
Le Tonkinois Gelomat matting agent for Le Tonkinois fermežový lak. Add between 20-45% by volume to achieve gloss from silk matt to full matt.
*
Damar powder
Dammarharts or Damarharts any of various resins used in varnishes and inks and obtained chiefly in Malaya and Indonesia from several timber trees (families Dipterocarpaceae and Burseraceae) package contains carefullz chosen bright and clear pieces Dammar is to be resoved in turpentine. It creates varnish effect. Dammar has been used for decades to create exceptional glossy effect especcially for oil paintings
powder, grains, can contain dirt
Ottosson White linseed soap 5 liters
Our WHITE Linseed soap is crafted from Swedish cold pressed linseed oil with the addition of Titanium dioxide pigment. The product is specially developed for treating wood floors where a light / white tinted surface is desired.
Usage:
1. Shake the can properly before use.
2. Dissolve 20% of white soap in 80% of lukewarm water.
3. Scrub the soap solution in the longitudinal direction of the wood.
4. Wait 30-60 minutes and then wipe off any excess soap solution/water with a dry/twisted mop or cloth.
5. Repeat treatment if a higher whiteness is desired.
If more saturation is desired, wait 1 – 2 days and further saturate the surface with Ottosson White Linseed soap/Ottosson Linseed soap natural. Use the same amount of soap/water for the solution as above
care/cleaning
for daily cleaning of the surfaces cleaned by white soap use just vacuum cleaner When the wood starts to get dirty, it is easily washed off with Ottosson Linseed oil soap natural. Use a weaker solution of 1 liter of soap to 20 liters of lukewarm water
iné názvy: Ottosson Vitsåpa, Ottosson white linseed oil soap
Le Tonkinois – Bio Impression
Special inpregnation for teak wood Base layer for Le tonkinois, suitable for all wood types is a deep-penetrating, fast-drying and moisture-protecting natural oil varnish consisting of linseed oil, castor oil, palm oil, lemon oil and aloe. It has an excellent adhesion to all hard resinous and greasy woods. Provides longlasting protection and helps hardening of wood perfect protection against UV also used as base layer for varnish
Thanks to deeply penetrating features, the capilars of the wood are naturally closing this is decreasing the possibility of wood bloating and minimalizes damage of paint It has an excellent adhesion to all hard resinous and greasy woods.
Application:
To obtain an “oily appearance” apply Bio Impression with a Scotch-Brite sponge. The wooden surfaces should be clean and grease-free, preferable the surface should be freshly sanded. The moisture content of the wood must not exceed 14%. Bio Impression is applied to at least 2 layers indoors and 3-5 layers outdoors.
Usage:
Approx 20m2 per liter and layer
More layers - more protection
Drying time:
Approx 24 hrs by room temperature, with good ventilation and low humidity.
Varnish shade BLACK
Portion packed linseed oil paint in cans (0,5 liter) is intended for mixing with 0,5 litre of OTTOSSON VARNISH OIL. The mixture becomes a transparent VARNISH SHADE of BLACK. The varnish is suitable for floor treatment, furniture etc. and results in a strong and durable surface. and results in a strong and durable surface. If a satin finish is required, then the varnished surface can be treated with Ottosson oil wax.
If a higher gloss level is desired, then the surface can be further varnished using Le Tonkinois Bioimpression
Swedish cooked coldpressed linseed oil 200 l – barrel
Swedish cooked coldpressed linseed oil
stored in cold places, pure and clear linseed oil is being heated at 140 C. Used mainly for mixing with linseed paint in interior . this oil is contained in all of our linseed paint
Other name: Swedish cold-pressed boiled linseed oil 200 liter barrel
Swedish boiled cold pressed linseed oil
The raw material is cold pressed stored and absolutely pure raw linseed oil which is heated to approx. 140 C. Used for diluting linseed oil paint and as a varnish indoors. We use this boiled linseed oil as a binding agent in all our linseed oil paints.